EasyManua.ls Logo

THOR Class C Series - Heating;Cooling

THOR Class C Series
132 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
INTERIOR
94
CUSTOMER CARE | 877.855.2867
11
Please refer to the specic appliance component manufacturers owner's manual that came
with your Owner’s Packet. It will detail the product installed in your motorhome. If you
feel it is missing please have the brand, model, and serial number of your specic appliance
available before contacting your selling dealership for assistance in obtaining a replacement.
For your convenience, many appliance manufacturers have their owner's manuals available for
download from their respective websites.
Each appliance in your motorhome is warranted by its own manufacturer. It is very important
that you review ALL the literature provided in your Owner’s Packet. Fill out and mail any
warranty registration cards as required by the appliance manufacturers. Please contact your
selling dealer, TMC Customer Care, or the appliance manufacturer if you have any questions
regarding the operation, maintenance, or safety of the appliances in your motorhome.
Heating/Cooling
Dierent factors aect the ambient temperature inside your motorhome. e purpose of a
thermostat is to keep the air temperature at the level you have selected. Please refer to the air
conditioner and furnace manufacturers instructions for operation, safety, and maintenance
instructions.
NOTE: Always turn OFF the air conditioner,
furnace, and all electrical appliances before
disconnecting the shore line power cord
from the 120 volts AC power source or
shutting OFF the generator.
WHEN INSTALLING CLOTHES DRYER IN THIS CLOSET
REFER TO APPLIANCE MANUFACTURER’S INSTALLATION INSTRUCTIONS FOR:
a) DRYER TO BE LISTED BY THE APPLIANCE MANUFACTURER AS
“SUITABLE FOR INSTALLATION” IN CLOSET LOCATIONS.
b) VENTILATION OPENINGS (FRESH AIR) TO BE SIZED PER INSTALLATION
INSTRUCTIONS.
c) EXHAUST DUCT TO BE INSTALLED AND SIZED PER INSTALLATION
INSTRUCTIONS.
NOTE: DUE TO VARIATIONS OF DRYER MANUFACTURERS, NO DRYER VENT
FRAMING HAS BEEN INSTALLED. REMOVE THIS PANEL TO COMPLETE THE
DRYER VENT INSTALLATION.
DA2182
Typical stacked washer/dryer
Typical dryer label (if so equipped)

Table of Contents

Related product manuals