35
Operation
The on/off and speed selector switches are located at
the front left-hand corner of the turntable plinth. There
are two speeds: There are two speeds: 33 ⅓ rpm (for
LPs) and 45 rpm (for singles). ➔ Fig. 14
To play a record, first start the turntable by selecting
the appropriate speed. Then engage the tonearm lift
(➔ Fig. 15) by lifting its lever, position the pick-up car-
tridge over the run-in groove or the desired track and
lower the tonearm lift.
The turntable does not feature an automatic shut-
off mechanism. Therefore, as soon as the stylus has
reached the run-out groove, engage the tonearm lift and
switch the turntable off.
Fig. 15
Fig. 14
To Next Page
Loading...
