EXULUS-HD1 & EXULUS-4K1 Spatial Light Modulators Chapter 3: Description
Page 8 CTN008794-D02
Trigger Output
The trigger output connector (SMA) of EXULUS-4K1(/M) generates an output signal which can be used to
synchronize external devices with the SLM.
The output signal is a 3.3V TTL with 77us of pulse width. The frequency follows the refresh rate set using the display
setting, i.e. 24 Hz or 30 Hz, see Chapter 4.2. for details.
Figure 12 Trigger Output of EXULUS-4K1(/M), Refresh Rate of 30 Hz
To Next Page
Loading...
