THORLABS KIM101 Original Instructions

Page 29 ETN040053-D02
K-Cube Inertia Piezo Motor Driver
4.4.8 Menu Option - Enable Axis Mode
This option is used to set the way in which the motor
axis is enabled from the top panel CHANNEL
SELECT button, either a single axis, or a pair of axes.
It is also used to disable the motor axes.
Press the MENU button, then use the joystick to scroll
through the menu options.
Press the MENU button to enter the Enable Axis
Mode option.
Use the Joystick to select the required axis option.
During operation, channel selection is achieved via
the top panel CHANNEL SELECT button.
Enable Single - The motor axes can be selected
individually, CH1 through CH4.
Enable Axis Pair - The motor axes can be selected in
pairs, CH1 and CH2 or CH3 and CH4.
Disable All - The motor channels are disabled.
Press the MENU button to save the selection and
return to the operating mode.
MENU
MENU
KIM101
KIM101
Enabled Axis CH1
Ch1_X1 +0
Ch2_Y1 +0
Ch3_X2 +0
Ch4_Y2 +0
Enabled Axis 1+2
Ch1_X1 +0
Ch2_Y1 +0
Ch3_X2 +0
Ch4_Y2 +0
Menu options
Use joystick
KIM101
Menu options
7 En Axis Mode
KIM101
Enable Single
Select Enable
KIM101
MENU
MENU

THORLABS KIM101 Specifications

General

Brand	THORLABS
Model	KIM101
Category	Controller
Language	English