Page 3 16275-D03
LTS Series Long Travel Stages
a client application. The instrument panel reflects the current operating state of the
controller unit to which it is associated (e.g. such as motor position). Updates to the
panel take place automatically when a user (client) application is making software
calls into the same Control. For example, if a client application instructs the
associated stage to move, the progress of that move is reflected automatically by
changing position readouts on the graphical interface, without the need for further
programming intervention.
The Kinesis Controls collection provides a rich set of graphical user panels and
programmable interfaces allowing users and client application developers to interact
seamlessly with the Kinesis hardware. Each of the Kinesis controllers has an
associated .Net Control and these are described fully in the handbooks associated
with the controllers.
Fig. 1.2 System Architecture Diagram
Refer to the main Kinesis Software online help file, for a complete programmers guide
and reference material on using the Kinesis Controls collection. This is available
either by pressing the F1 key when running the Kinesis server, or via the Start menu,
Start\Programs\Thorlabs\Kinesis\Kinesis Help.
1.2.3 Software Upgrades
Thorlabs operate a policy of continuous product development and may issue software
upgrades as necessary.
To Next Page
Loading...
