6.6 Maintenance and Repair
52
6.6 Maintenance and Repair
6.7 Maintenance
Protect the PM100A from adverse weather conditions. The PM100A is not water
resistant. Prevent the unit from shock, the analog needle meter contains sensitive
mechanics that may misalign.
Attention
To avoid damage to the PM100A, do not expose it to spray, liquids or
solvents!
The unit does not need a regular maintenance by the user.
If necessary the unit and the display can be cleaned with a cloth dampened with
water. Use „ESD cleaner‟ dampened cloth for the display glass, this prevents that the
needle reacts on static influences like striking over the glass.
The PM100A does not contain any modules that could be repaired by the user
himself. If a malfunction occurs, the whole unit has to be sent back to Thorlabs. Do
not remove covers!
To guarantee the specifications given in chapter 0 over a long period it is
recommended to have the unit calibrated by Thorlabs every year.
To Next Page
Loading...
