Thundercomm EB5 Edge AI Box Hardware User Manual
- 3 -
alarm number. No re-entry into the burning building is allowed under any circumstances.
1.1.5. On equipment
Before operation, the equipment should be reliably fixed on the floor or other stable objects, such as walls or
mounting frames.
Do not block the vent when the system is running.
When installing the panel, if the screws need to be tightened, you must use tools.
After installing the equipment, please clear the empty packing materials in the equipment area.
1.1.6. Marks on equipment
Refer to the table below to comprehend safety signs.
Table 1-1.Safety sign list
Graphic Name Instructions
Warning signs
The logo indicates that improper operation may result in
equipment damage or personal injury.
External ground
marking
This mark is the grounding mark outside the equipment. The
two ends of the grounding cable are connected to different
equipment, which means that the equipment must be earthed
at the connecting point, so as to ensure the normal operation of
the equipment and the personal safety of operators.
Internal ground
mark
This mark is the grounding mark inside the equipment. Both
ends of the grounding cable are connected to different
components of the same equipment, which means that the
equipment must be grounded through the connecting point to
ensure the normal operation of the equipment and the
personal safety of operators.
Antistatic mark
This mark indicates an electrostatic sensitive area. Do not touch
the device with your bare hands. When operating in this area,
take strict anti-static measures, such as wearing anti-static wrist
bands or anti-static gloves.
1.1.7. Electrical safety
High Pressure
Notice:
High voltage power supply provides power for the operation of equipment. Direct contact with high
voltage power supply or indirect contact with high voltage power supply through wet object will bring
fatal danger.
Improper and incorrect operation of high voltage may cause accidents such as fire or electric shock.
To Next Page
Loading...
