EasyManua.ls Logo

Thundercomm TurboX C865 Dev Kit - User Manual

Thundercomm TurboX C865 Dev Kit
60 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
1
TurboX C865 Dev Kit
Hardware User Guide
Rev. A
June 06, 2020

Table of Contents

Question and Answer IconNeed help?

Do you have a question about the Thundercomm TurboX C865 Dev Kit and is the answer not in the manual?

Summary

TurboX C865 Dev Kit Overview

Key Features

Lists the main components and specifications of the TurboX C865 Dev Kit.

Board Views

Illustrates the top and back views of the C865 Main IO board with labeled ports.

Terms and Definitions

Defines technical terms and abbreviations used throughout the manual.

Getting Started

Required Equipment

Lists the necessary hardware and software to begin using the development board.

OS Startup Process

Outlines the steps for booting the operating system on the board.

System Components and Interfaces

System Architecture

Provides the system block diagram, processor, and memory details.

Connectivity Options

Covers display, camera, USB, audio, Ethernet, and Wi-Fi/BT interfaces.

Board Controls and Power

Details power input, buttons, UART, LEDs, and expansion connectors.

Sensors and Configuration

Explains inertial sensors, DIP switches, and other functionalities.

Low Speed Expansion Connectors

Primary Low Speed Connector (LS1)

Details the pinout and signals for the LS1 low-speed expansion connector.

Secondary Low Speed Connector (LS2)

Details the pinout and signals for the LS2 low-speed expansion connector.

Tertiary Low Speed Connector (LS3)

Details the pinout and signals for the LS3 low-speed expansion connector.

High Speed Expansion Connectors

Primary High Speed Connector (HS1)

Details the pinout and signals for the HS1 high-speed expansion connector.

Secondary High Speed Connector (HS2)

Details the pinout and signals for the HS2 high-speed expansion connector.

Tertiary High Speed Connector (HS3)

Details the pinout and signals for the HS3 high-speed expansion connector.

Power Management

DC Power Input

Explains the methods for supplying DC power to the development board.

Power Source Selection

Describes the board's behavior when multiple power sources are available.

Power Sequencing

Details the order in which power rails are enabled upon board power-up.

Power Measurements

Explains how to measure board power consumption using sense resistors.

Buttons and Status LEDs

Board Buttons

Describes the functionality of the volume, power, and reset buttons.

Status and User LEDs

Explains the purpose of the power indicator, Wi-Fi, BT, and user LEDs.

Boot Configuration

DIP Switch Settings

Details the DIP switch configurations for controlling the boot sequence.

Mechanical Specifications

Board Dimensions

Provides the physical dimensions and layout of the development board.

Appendix

Navigation Mezzanine

Describes the Navigation Mezzanine for camera connectivity and embedded vision applications.

Machine Communication Mezzanine

Details the Machine Communication Mezzanine for cellular network connectivity.

Thundercomm TurboX C865 Dev Kit Specifications

General IconGeneral
BrandThundercomm
ModelTurboX C865 Dev Kit
CategoryMicrocontrollers
LanguageEnglish

Related product manuals