Tiandy S6 - Page 42

42
PPPoE
Check to enable PPPoE function, enter User
name and confirm password.
NTP
<NTP Server> enter server address.
<Port> enter NTP server port.
<Interval> update interval.
Others
Set Http and Https port, Enable UPnP and SNMP functions.
6.6.4 IP Filter
Blacklist
User want to block some IP address, select<Block the Following IPs>, input the block IP address
and<Add>,<Save>.Max to add 16 blacklist IP address.
Caution: Please don’t add your own IP address in blacklist, otherwise you will not be able to
login.
Whitelist
User want to allow only some IP address, select <Allow the Following IP>, input trusted IP
address, <Add> and <Save>. Max to 16 whitelist IP address.
Caution: Once enable the whitelist function, please make sure to add your own IP address in
whitelist, otherwise you will not be able to login the device.