35
TOPSIDE CONTROL INSTRUCTIONS
Right Button: Press the Right button to highlight Filter Cycle 1
Start time Hour.
Up Button: To Increase the Filter Cycle 1 Start time hours.
Down Button: To decrease the Filter Cycle 1 Start time hours.
(NOTE: To change AM and PM you will need to cycle the
hours past 12)
Right Button: Press the Right button to high light Filter Cycle 1
Start time minutes.
(NOTE: Changing the minutes goes by 15 minute intervals)
Up Button: To increase the Filter Cycle 1 Start time Minutes.
Down Button: To decrease the Filter Cycle 1 Start time Minutes.
Right Button: To highlight the Run Time Hours.
Up Button: To increase the Run Time Hours.
Down B utton: To decrease the Run Time Hours.
Right Button: Press the Right button to high light Run Time
Minutes.
(NOTE: Changing the minutes goes by 15 minute intervals)
Up Button: To increase the Run Time Minutes.
Down Button: To decrease the Run Time Minutes.
The panel calculates the end time and displays it automatically.
Right Button: Press the Right button to highlight Filter Cycle 2.
To Next Page
Loading...
