TOPSIDE CONTROL INSTRUCTIONS
Up Button: To Filter Cycle 2 on or off.
OR
Down Button: To Filter Cycle 2 on or off.
Right Button: Press the Right button to high light Filter Cycle 1
Start time Hour.
Up Button: To Increase the Filter Cycle 2 Start time hours.
(NOTE: To change AM and PM you will need to cycle the
hours past 12)
Down Button: To decrease the Filter Cycle 2 Start time hours.
(NOTE: To change AM and PM you will need to cycle the
hours past 12)
Right Button: Press the Right button to high light Filter Cycle 2
Start time minutes.
(NOTE: Changing the minutes goes by 15 minute intervals)
Up Button: To increase the Filter Cycle 2 Start time Minutes.
Down Button: To decrease the Filter Cycle 2 Start time Minutes.
Right Button: To highlight the Run Time Hours.
Up Button: To increase the Run Time Hours.
Down Button: To decrease the Run Time Hours.
Right Button: Press the Right button to high light Run Time
Minutes.
(NOTE: Changing the minutes goes by 15 minute intervals)
Up Button: To increase the Run Time Minutes.
36
To Next Page
Loading...
