Tiger JOHN DEERE 5083E User Manual

PARTS LISTING WITH
ASSEMBLY INSTRUCTIONS
Tiger Corporation
3301 N. Louise Ave.
Sioux Falls, SD 57107
1-800-843-6849
1-605-336-7900
www.tiger-mowers.com
Last Updated - 1/12/2012
LYNX
ASSEMBLIES
2011
JOHN DEERE 5101E, 5093E, 5083E
06010022

Tiger JOHN DEERE 5083E Specifications

General

Brand	Tiger
Model	JOHN DEERE 5083E
Category	Lawn and Garden Equipment
Language	English

Summary

SAFETY

General Safety Instructions and Practices

Safe operation is operator's responsibility; be aware of hazards and follow precautions.

Critical Safety Warnings

Follow DANGER, WARNING, and CAUTION directives regarding operation, decals, and tractor setup.

Hazard Warnings and Precautions

Avoid children riding/operating, ensure proper mounting, and work safely under implements.

Personal Protective Equipment and Transport Safety

Wear PPE, use hearing protection, and transport at safe speeds with proper tractor controls.

Maintenance and Operation Safety

Follow instructions for lubrication, inspections, ventilation, and keeping clear of rotating parts.

Safe Mowing Practices and Equipment Integrity

Ensure clear visibility, use all safety devices, and operate from the seat.

Blade Safety and Operational Hazards

Avoid contact with obstacles, remove foreign objects, and maintain proper blade condition.

Operation and Transport Safety

Avoid mowing with multiple machines, stop if bystanders are near, and use caution when raising the mower head.

Operational and Transport Hazard Warnings

Be aware of overhead obstructions, transport limits, OPS/ROPS use, and disconnect power before service.

Component Safety and Warnings

Be aware of emissions, battery hazards, and use genuine Tiger parts for safety and warranty.

Joystick Operation and Decal Locations

Explains joystick functions for boom control and lists locations for safety decals inside the cab.

Lubrication Recommendations

Provides a table of recommended lubricants for various tractor and mower components.

FEDERAL LAWS AND REGULATIONS

ASSEMBLY SECTION

ASSEMBLY

Tractor Preparation

Steps to prepare the tractor for mounting, including removing steps and wheels.

Valve Plumbing (SVC Only Units)

Details plumbing connections for the selective control valve (SCV) and husco valve.

Valve Plumbing (With Mid-Mount Valve)

Explains hydraulic connections for SCV and mid-mount valve, including power beyond and return lines.

Hose and Wire Routing

Guides the attachment of clamps and routing of hoses/wires in the rear wheel well.

Hydraulic Tank Installation

Instructions for installing fittings, tubes, and the tank itself into the mounting bracket.

Rear Stow Lynx Hose Routing

Guides routing hoses through the space between the swivel and boom mounting bracket.

Main Boom Installation

Steps for installing the boom swivel, boom, and cylinders, including greasing.

Final Preparation for Operation

Placing decals, greasing points, filling reservoir, and checking for leaks before operation.

Main Frame Installation

Steps to install the main frame to the tractor casting using capscrews and hardware.

Valve Mounting

Instructions for attaching the valve mounting bracket and plate, and then the valve itself.

General Hose Installation and Covering

Covers general hose installation and applying hose covering for protection.

Deck Attachment

Instructions for attaching the secondary boom, deck pivot cylinder, and connecting hoses.

OPERATION SECTION

OPERATION

Operating Instructions Overview

Introduces operating instructions, emphasizing safety equipment and operator responsibility.

Operator Requirements

Defines requirements for a qualified operator, including manual understanding and experience.

Tractor Requirements and Capabilities

Specifies tractor horsepower, size, ROPS, safety devices, and ballast for safe operation.

Tractor Lighting and SMV Emblem

Requirement for warning lights and SMV emblem for operation on public roadways.

Tractor Ballast Requirements

Minimum down force requirements for tractor stability with boom extended on level ground and slopes.

Starting the Tractor

Details essential tractor controls and pre-start checks for safe engine ignition.

Connecting Attaching Heads to the Boom

Instructions for attaching the pivot bracket, cylinder, dogleg, and mower head to the boom.

Tractor Pre-Operation Inspection/Service

Lists daily inspection items for the tractor, including tires, brakes, lights, and fluid levels.

Boom Unit Pre-Operation Inspection and Service

Inspects boom arm and head, ensuring all parts are secured and safety signs are legible.

Boom Arm Assembly Inspection

Hydraulic Pump/Oil Reservoir Checks

Rotary Head Inspection

Inspects blades, bolts, deflectors, hydraulic lines, and skid shoes of the rotary head.

Flail Head Inspection

Inspects flail blades, bolts, deflectors, rollers, hydraulic lines, drive belts, and skid shoes.

Cutting Component Inspection

Details inspection of blade pan and assembly, including wear, cracks, and damage.

Tractor Pre-Operation Inspection Checklist

Boom Pre-Operation Inspection Checklist

Cable Controlled Mowers: Control Valve Functions

Lever Functions: Main Boom, Secondary Boom, Deck Roll

Lever Functions: Boom Swivel and Boom Shield

Joystick Controlled Mowers

Switch Box and Joystick Control Functions

Joystick Control Movements

Joystick Control Movements: Secondary Boom, Deck Roll, Boom Swivel

Driving the Tractor and Implement

Brake and Differential Lock Setting

Driving the Tractor and Boom

Operating the Boom Unit and Attached Head

Emphasizes understanding controls, familiarizing with the area, and operating safely with attachments.

Foreign Debris and Overhead Obstructions

Highlights hazards from foreign debris, overhead obstructions, and the importance of area inspection.

Operating Speed and Ground Speed

Mower Operation

Cutting Brush Operation

50” Boom Flail Operation

63” Boom Flail Operation

Shutting Down the Attached Head (Standard Equipment)

Placing Boom Arm on Boom Rest (Standard Equipment)

Transporting on Public Roadways

Stresses caution, required safety features (SMV, lights), and awareness of other road users.

Road Operation Considerations

Hauling the Tractor and Implement

Securing the Load During Transport

ROPS and Seat Belt

Emphasizes the need for ROPS and seat belts to protect the operator from rollovers.

Pre-Operation Inspection and Service

Emphasizes performing daily inspections and service to ensure safe operation.

Hydraulic Line Inspection

Safety Shield and Deflector Operation

Operating the Attached Mower Heads

50” & 60” Boom Rotary Operation

Transporting the Tractor and Implement

Operator Thrown Object Protection

Details protective equipment needed for the operator against thrown or falling objects.

MAINTENANCE SECTION

MAINTENANCE

General Instructions

Regular Maintenance Schedule

Outlines servicing intervals based on tractor hour meter usage.

Torque Specifications for Fasteners

Provides torque values for standard fasteners based on grade and thread size.

Lubrication Recommendations

Details recommended lubricants for tractor hydraulics, mower hydraulics, gearboxes, and shafts.

Hydraulic Reservoir Filling Instructions

Replacing High Pressure Hydraulic Filter Element

Blade Inspection and Replacement

Inspect blades daily for wear, cracks, or imbalance; replace in pairs. Check blade rotation direction.

Rotary Knife Blade Replacement

Flail Blades Inspection

Inspect flail blades daily for wear, damage, or cracks; replace immediately if worn or damaged.

Blade Pins and D-Ring Inspection

Inspect blade pins and D-rings daily for wear, cracks, or gouges; replace immediately if worn.

Flail Axe Blades Inspection

Inspect flail axe blades daily for wear, damage, or cracks; replace immediately if worn or damaged.

Flail Axe Blade Bolt Inspection

Inspect blade bolts daily for wear, cracks, or damage; replace immediately if worn or damaged.

50” Flail Knife Blade Replacement

Bearing Installation

Boom Cylinder Removal and Replacement

Cuttershaft Bearing Replacement

Daily Maintenance Schedule

Maintenance Precautions

Lists critical precautions for maintenance, including cleaning, lubrication, and handling pressurized systems.

Daily or Every 8 Hours Maintenance

Torque-Tension Relationship for Metric Fasteners

Lists torque values for metric fasteners based on grade and thread size.

Replacing In-Tank Hydraulic Filter

Replacement of Rotary Disk/Blade Bar

63” Boom Flail Knife Replacement

Bearing Adjustment

TROUBLESHOOTING

Mower Will Not Lift

Mower Will Not Start or Run

PARTS SECTION

PARTS ORDERING GUIDE

TRACTOR MOUNT KIT

TRACTOR MOUNT KIT - HYDRAULICS

TRACTOR MOUNT KIT, WHEEL WELL TANK

TRACTOR MOUNT KIT, LOADER - HYDRAULICS

TRACTOR MOUNT KIT, LOADER

BOOM MOUNT KIT

BOOMREST, 3-POINT STOW

BOOMREST, SINGLE COLUMN

4 SPOOL CABLE CONTROL MOUNT - SCV ONLY

4 SPOOL CABLE CONTROL MOUNT - MID-MOUNT VALVE

CABLE (MANUAL) LIFT VALVE - 4 SPOOL

CABLE (MANUAL) LIFT VALVE BREAKDOWN - 06502079

CABLE (MANUAL) LIFT VALVE BREAKDOWN - 06502094

POLYCARBONATE SAFETY WINDOW

WHEEL SPACER

WHEEL WEIGHT

COMMON LYNX BOOM

BOOM HOSE ROUTING

BOOM ASSEMBLY

50IN ROTARY MOWER ASSEMBLY

60IN ROTARY MOWER ASSEMBLY

50IN ROTARY KNIVES AND DISH

60IN ROTARY BLADE BAR AND KNIVES

ROTARY MOWER SPINDLE ASSEMBLY

BOOM ROTARY PIVOT ASSEMBLY

50IN FLAIL DRIVE ASSEMBLY

50IN FLAIL MOWER ASSEMBLY

50IN FLAIL MOWER ASSEMBLY, PASS THRU KNIVES

63IN FLAIL DRIVE ASSEMBLY

63IN FLAIL MOWER ASSEMBLY

BOOM FLAIL PIVOT ASSEMBLY

3IN X 10IN WELDED CYLINDER BREAKDOWN

3IN X 18IN WELDED CYLINDER BREAKDOWN

3-1/2IN X 20IN WELDED CYLINDER BREAKDOWN

4IN X 9IN WELDED CYLINDER BREAKDOWN

4IN X 20IN WELDED CYLINDER BREAKDOWN

RESERVOIR TANK FILTER ASSEMBLY

FRONT HYDRAULIC PUMP

50IN AND 60IN ROTARY MOTOR BREAKDOWN

50IN AND 63IN FLAIL MOTOR BREAKDOWN

COOLER OPTION

PUMP AND GRILL GUARD OPTIONS

MANUAL LIFT VALVE SWITCH BOX

MANUAL LIFT VALVE SCHEMATIC

SOLENOID SWITCH BOX AND WIRING

BRAKE VALVE ASSEMBLY

BRAKE VALVE HYDRAULIC SCHEMATIC

CLEAN CUTTER HEAD

CLEAN CUTTER ASSEMBLY

CLEAN CUTTER OPERATION

CLEAN CUTTER OPERATION - CONTINUED

CLEAN CUTTER MAINTENANCE

CLEAN CUTTER BLADE AND TEETH PARTS

CARBIDE TIP REPLACEMENT

FIRE SUPRESSION SYSTEM

FIRE SUPRESSION SYSTEM PARTS

FIRE SUPRESSION SYSTEM ELECTRICAL SCHEMATIC

WETCUT

WETCUT 50 GALLON TANK MOUNT

WETCUT 100 OR 150 GALLON TANK MOUNT

WETCUT TANK PLUMBING

WETCUT SPRAYER HEAD ASSEMBLY

WETCUT CABLES

WARRANTY SECTION

WARRANTY INFORMATION