IM2023
46
2:Turn off the machine, unplug the power plug, and wrap the power cord around the
wrapping post; install the water
plug and the drainage cover.
3:Remove the exhaust pipe and keep it properly.
4:Cover the air conditioning with a plastic bag. Put the air conditioning in a dry place,
keep it out of the reach of children, and take dust control measures.
5:Remove batteries of the remote control and keep them properly.
Condensate removal instructions
1. When condensate is filling the tank, switch off the air conditioner and turn off the
power.
Note: Move the device carefully to avoid spilling of water in the bottom of the case
2. Place the water container behind the outlet at the rear part of the device
3. Unscrew the drain cap and pull out the plug, the water will automatically flow into the
water tank.
Note:
1. Hold the drain plug cover, and the water plug properly.
2. During drainage, the housing may be tilted slightly backwards.
Note: If the water container can’t contain all the condensate from the air conditioner,
cover the drain with a plug as soon as possible to prevent water from spilling onto the
floor.
4. When the water is drained, stick water plug and tighten the drain cap.
Note: Continue to operate the device only after installing the water plug and drain cap
to prevent condensation from spilling onto the floor.
To Next Page
Loading...
