Timex EXPEDITION Series User Manual

1
ENGLISH 032-095000
EXTENDED WARRANTY
Available in U.S. only. Extend your warranty for an additional 4 years
from date of purchase for $5. You can pay with AMEX, Discover, Visa or
MasterCard by calling 1 800-448-4639 during normal business hours.
Payment must be made within 30 days of purchase. Name, address,
telephone number, purchase date, and 5-digit model number required. You
can also mail a check for $5 to: Timex Extended Warranty, P.O. Box 1676,
Dept. EF, Little Rock, AR 72203.
Please read instructions carefully to understand how to operate your Timex
®
watch. Your model may not have all of the features described in this
booklet.
FEATURES
• Time with 12- or 24-hour format
• Date with MM-DD or DD.MM format
• 3 time zones
• Alerts with audible tone and/or silent vibration
• Optional hourly chime
• 100-hour chronograph with display of lap and split times
• 24-hour countdown timer (count down and stop or repeat)
• Occasion reminders
• Hydration timer
• 3 daily/weekday/weekend alarms with 5-minute backup
• Customizable mode set (hide unwanted modes)
• INDIGLO
®
night-light with NIGHT-MODE
®
feature
Press MODE repeatedly to step through modes: Chrono, Timer, Occasion,
Hydration, Alarm 1, Alarm 2, and Alarm 3. Press MODE to exit current mode
and return to Time mode.
BASIC OPERATION
SET
(DONE)
INDIGLO
®
BUTTON
MODE
(NEXT)
START·SPLIT
(+)
STOP·RESET
(–)
Button functions shown with secondary functions in parentheses
TIME
To set time, date, and options:
1. With time and date showing, press and hold SET.
2.Currenttimezone(1,2,or3)ashes.Press+ or – to select time zone to
set, if desired.
3. Press NEXT.Hourashes.Press+ or – to change hour (including AM/
PM); hold button to scan values
4. Press NEXT.Minutesash.Press+ or – to change minutes
5. Press NEXT.Secondsash.Press+ or – to set seconds to zero.
6. Press NEXT.Monthashes.Press+ or – to change month.
7. Press NEXT.Dayashes.Press+ or – to change day.
8. Press NEXT.Yearashes.Press+ or – to change year.
9. Press NEXT to set options. Press + or – to change value and then press
NEXT to go to next option. Press DONE at any step to exit and save
settings. Available options are 12- or 24-hour time format, MM-DD or
DD.MM date format, tone or vibration alert, hourly chime N, beep for
button presses, customizable mode set (Select “HIDE” for unwanted
modes – they are removed from mode sequence.
If you hide a mode, you can turn it back on later using procedure above.
Press START·SPLIT once and hold to see 2nd time zone. Press
START·SPLIT twice and hold to see third time zone. Continue to hold button
for 4 seconds to switch to displayed time zone.
Press and hold STOP·RESET to see next upcoming occasion (see
description of Occasion mode). Release and immediately press and hold
again to see subsequent occasions.
Dual mode offers choice of alert type for alarms and countdown time:
audible tone, silent vibration or combination of vibration followed by tone.
To set, refer to point 9.
CHRONOGRAPH
This mode provides a chronograph (stopwatch) function. Press MODE to go
to Chrono mode.
To start, press START·SPLIT. Chrono counts up by hundredths of a second
up to one hour, then by seconds up to 100 hours. Stopwatch icon washes
to indicate chrono is running.
To stop, press STOP·RESET. Stopwatch icon w freezes to indicate chrono
is stopped.
To resume, press START·SPLIT, or to reset (clear) chrono, press and hold
STOP·RESET.
When chrono is already running, chrono continues to run if you exit mode.
Stopwatch icon w appears in TIME mode.
While chrono is running, press START·SPLIT to take a split. Lap and split
times will be displayed with lap number.
LAP 1 = 7.11 LAP 2 = 7.50
SPLIT 2 = 15.01
LAP 3 = 7.08
SPLIT 3 = 22.09
LAP 4 = 7.30
SPLIT 4 = 29.39
SPLIT 1 = 7.11
To set display format, press SET. Then, press + or – to select desired
format. Press DONE to exit.
NOTE:
• When a split is taken, times are frozen on the display for 10 seconds. Press
MODE to release display and show running chrono immediately.
TIMER
Timer mode provides a countdown timer with alert. Press MODE repeatedly
until TIMER appears.
To set countdown time:
1. Press SET.Hoursash.Press+ or – to change hours; hold button to scan
values.
2. Press NEXT.Minutesash.Press+ or – to change minutes.
3. Press NEXT.Secondsash.Press+ or – to change seconds.
4. Press NEXT.Actionatendofcountdownashes.Press+ or –
to select STOP or REPEAT, indicated by hourglass icon with arrow I.
5. Press DONE at any step when done setting.
To start timer, press START·SPLIT. Timer counts down every second from
countdown time. Hourglass icon H ashestoindicatetimerisrunning.
To pause countdown, press STOP·RESET. Hourglass icon H freezes to
indicate timer is stopped.
To resume countdown, press START·SPLIT, or to reset countdown, press
STOP·RESET.
Watchbeepsandnight-lightasheswhencountdownends(timerreaches
zero). Press any button to silence. If REPEAT AT END selected, timer repeats
countdownindenitely.
Timer continues to run if you exit mode. Hourglass icon H appears in Time
mode.

Timex EXPEDITION Series Specifications

General

Brand	Timex
Series	EXPEDITION
Category	Watch
Movement	Quartz
Indiglo Backlight	Yes
Band Material	Nylon or Leather
Display Type	Analog
Water Resistance	50 meters
Features	Date display
Battery Life	Varies by model