QUICK START
The next three pages will give you the basics you need to get your watch
up and running in under 5 minutes. Continue reading for full instructions.
Setting the Time and Date
1. Press MODE until time of day appears.
2. Press and hold SET to start.
3. Press START/SPLIT (+) or STOP/RESET (-) to increase or decrease set-
ting values for time zone, time, date, sounds, and measurement units.
4. Press MODE (NEXT) to advance to the next setting option.
5. Press SET (DONE) to finish.
Calibrating the Compass
Prior to calibrating, remove the watch from your wrist, hold it in your hand,
and choose a declination angle from the table on pages 25 and 26.
1. Press MODE until COMPASS appears.
2. Press and hold SET to start.
Timer
Countdown timer works up to 100 hours, with the option to repeat count-
down up to 99 times.
Alarm
• Choose from daily, weekday, weekend, or weekly alarms.
• One-time backup alert if alarm is ignored.
11
10
ENGLISH QUICK START
To Next Page
Loading...
Need help?
General