82
83
In normal operation the Chronograph will cycle through
the 30-minute sequence twice for a total maximum of
one hour. Once this hour has elapsed, the upper hand
will remain on the 30 minute marker and the lower hand
will return to zero. The chronograph function will need
to be reset prior to using the chronograph function again
or before changing to a different mode. (Please note:
button A is disabled when the maximum one hour time
has elapsed and will not function until the chronograph
has been reset by pressing and holding button B for 3
seconds).
3GMT
A
2 31
SECOND
HAND
CROWN
ROTATING TOP RING
(24-HOUR FORMAT)
4TH CENTER HAND
MINUTE
HAND
HOUR HAND
INNER RING /
NUMERALS
(24-HOUR FORMAT)
To Next Page
Loading...
