Timex T129 - Setting and Using Alarms; Alarm 1 and Alarm 2 Setup

6
TIME SET
P7
4
Press and release the Time Set
Button to complete time setting.
Setting and Using Alarms
1
Press and hold the Alarm 1 Button until current alarm time flashes on the display.
This unit has two independent alarms, Alarm 1 and Alarm 2. Each is set and operates in the same
way. Instructions below show Alarm 1. Follow the same method to set Alarm 2.
2
Press and release the Minus or Plus Button to adjust the desired alarm time.
NOTE: The PM indicator will light when the hour is set for PM. There is no AM indicator.
Press and release the Alarm 1 Button to confirm alarm setting.
3
2 SECS