To Next PageTo Next PageHow to fix poor spray pattern with my Titan 740ix?
To fix a poor spray pattern with your Titan Paint Sprayer, try the following: Replace the spray tip with a new or smaller one, following the instructions that came with the spray gun. Rotate the pressure control knob to adjust the pressure for a proper spray pattern. Clean all screens and filters. Add solvent to the material according to the manufacturer's recommendations.
General| Hose Length | 50 ft |
|---|---|
| Power Source | Electric |
| Voltage | 120 V |
| Type | Airless |
| Tip Size | 0.019 in |
High-pressure paint stream can pierce skin, causing serious injury or amputation.
Harmful fumes from paints/solvents can cause nausea, fainting, or poisoning.
Solvent and paint fumes can explode or ignite, causing property damage or severe injury.
Using incompatible materials can cause property damage or severe injury.
Read all instructions, follow codes, use authorized parts, and maintain equipment.
Proper grounding reduces the risk of electric shock.
Overview of the airless sprayer and its purpose.
Steps to prepare the sprayer before operation.
Flushing the system with solvent before painting.
Steps for applying paint using the airless sprayer.
Explains the meaning of sprayer pressure indicator lights.
Details the optional system for customizing and monitoring sprayer operation.
Explains timer screens, security code, and prime/pulse clean functions.
Steps to safely release system pressure before maintenance or shutdown.
Guidelines for holding the gun, spray pattern, and overlap for professional results.
Recommendations for practicing spray techniques for optimal results.
Instructions for cleaning the sprayer after use, especially with flammable solvents.
Lists required tools and general advice for sprayer repair.
Step-by-step guide for replacing filter components.
Instructions for removing and installing the motor assembly.
Procedure for replacing gears in the gearbox housing.
Guide for removing and installing the transducer assembly.
Steps to replace the PRIME/SPRAY valve assembly.
Procedures for servicing valves and the fluid section.
Detailed steps for repacking the fluid section with new components.
Addresses issues where the unit won't start or prime.
Solutions for problems with pressure loss or excessive spray surge.
Describes specific error codes (E1-E9) and their troubleshooting.
Illustrated breakdown of the main sprayer assembly parts.
Parts list for the high rider cart.
Parts list for the low rider siphon assembly.
Detailed breakdown of the fluid section components.
Illustrated parts list for the drive assembly.
Parts list for the low rider cart.
Identification and warning labels for the sprayer.
Visual representation of the sprayer's electrical connections.
Guidance on choosing the correct spray tip based on material and orifice size.
Information on accessories like Liquid Shield, Piston Lube, and special guns.
Details Titan's warranty terms and conditions for the equipment.
List of US patents covering Titan's products.
