Getting started...
EN
17
1. Lock-off button
2. On/off switch
3. Handle
4. Dust extraction
crossover lever
5. Power cord with plug
6. Dust extraction outlet
(both sides)
7. Air vents
8. Mounting bolt
9. Wing screw (x2)
10. Parallel guide
11. Wing nut
12. Angle bracket
13. Mounting thread
(parallel guide)
14. Mounting thread
(rebate depth gauge)
15. Rebate depth gauge
16. Scale
17. Cutting depth
adjustment knob
18. Dust bag
19. Blade (x2)
20. Hex bolts (x6)
21. Roller
22. Grub screws (x4)
23.
(x2)
24. Guard
25. Back plate
26. Foot
27. V-groove
28. Front plate
29. Hex key
30. Wrench
NOTE: Parts marked with * are not shown in this overview. Please
refer to the respective part in the instruction manual.
General
> Rated voltage, frequency : 220-240 V~, 50 Hz
> Rated input power : 900 W
> Rated no load speed n
0
: 16000 min
-1
> Cutting head type : 57002
> Planing width : 82 mm
> Cutting depth : 0-3 mm
> Rebating depth : 0-12 mm
> Protection class :
Il
> Weight : approx. 3.6 kg
Sound values
> Sound pressure level L
pA
: 84.9 dB (A)
> Sound power level L
WA
: 95.9 dB (A)
> Uncertainty K
pA
, K
WA
: 3 dB (A)
Hand arm vibration values
> Handle a
h,W
: 1.542 m/s²
> Uncertainty K : 1.5 m/s²
The sound values have been determined according to noise test code given in
EN 62841-1 and EN 62841-2-14, using the basic standards EN ISO 3744 and
EN ISO 11203.
TTB876PLN by TITAN
To Next Page
Loading...
Need help?
General
