Getting started...
EN
18
The sound intensity level for the operator may exceed 80 dB(A) and ear protection
measures are necessary.
The declared vibration value has been measured in accordance with a standard
test method (according to EN 62841-1 and EN 62841-2-14) and may be used for
comparing one product with another. The declared vibration value may also be
used in a preliminary assessment of exposure.
WARNING! Depending on the actual use of the product the vibration
values can differ from the declared total. Adopt proper measures to
protect yourself against vibration exposures. Take the whole work
process including times the product is running under no load or
switched off into consideration.
Proper measures include among others regular maintenance and
care of the product and accessories, keeping hands warm, periodical
breaks and proper planning of work processes.
Rating label explanation
Symbols
others the following symbols and abbreviations. Familiarise yourself with them to
reduce hazards like personal injuries and damage to property.
V ~ Volt, (alternating voltage) Hz Hertz
W Watt /min or
min
-1
Per minute
g Gram kg Kilogram
mm Millimetre m Metre
dB(A) Decibel (A-rated) m/s² Metres per second squared
Lock / to tighten or secure. Unlock / to loosen.
Note / Remark. Caution / Warning.
TTB876PLN by TITAN
TTB876PLN = Model Number
TT = TITAN
B = 220 - 240V ~
876 = Sequential Code
PLN = Planer
To Next Page
Loading...
Need help?
General
