33
8. SETTING FUNCTIONS
8.1. Setting Functions (1. PROGRAM SETTING)
8.1.1. Program input setting (1-1 PROGRAM INPUT)
Refer to p. 54 for the operation procedures.
[Playback sound data section and Control data section]
Each of the programs (P001-P256) consists of the "Playback sound data section" and "Control data section,"
each of which is composed of input data.
Refer to p. 16 "THE SENTENCE AND PROGRAM" for details.
Sentence A001
Sentence A002
Sentence A003
Sentence A004
·
·
·
Sentence A128 (A512)
Card A
P001-P256
Sentence B001
Sentence B002
Sentence B003
Sentence B004
·
·
·
Sentence B128 (B512)
Card B
B003
A002
Playback sound data section
Step 1
Step 2
Step 3
Step 4
Step 128
M015
（
Silent interval:
15 sec）
A128
Playback
method
Selected from 4
methods
Each setting item is
different in the
selected playback
method.
Output 1, output 2,
or output 1 & 2
Name of the program
Refer to p. 38, p. 58
“1-2 OUTPUT LEVEL.”
Can be set for
individual programs
Output
Program title
Program output
level
Program interval
Number of plays
Play interval
Busy output
Control data section
128 steps max.
(including silent
intervals)
Sentence
Plogram
Refer to p. 38, p. 60
“1-5 PROGRAM TITLE.”
Set in the “1-1 PROGRAM INPUT.”
Step No.
Sentence No.
Playback method
001 only
A001 assigned to P001
Continuous Program Playback
Output
Output 1 and output 2
Program title
P001-P256
Program output level
Graduation: 6
A128 assigned to P128
B001 assigned to P129
B128 assigned to P256
(Same as program
numbers)
(One sentence is assigned to
each program)
Playback method
Program interval
(Interval Timer)
Continous Program
Playback
Repeat Playback
Endless Playback
0, 1, 2, 3, 4, 5 sec
1, 2, ･･･128 repeats,
Endress
0, 10, ･･･50 sec
1, 2, ･･･99 min
ON
OFF
ON
OFF
OFF (no relation)
10, 20, ･･･50 sec
1, 2, ･･･99 min
Single Program
Playback
Number of plays
−
−
−
−
−
−
−
−
Play interval Busy output
[Initial setting for each program]
(factory-preset setting)
[Setting items different in playback methods]
At program
interval
At repeat
interval
To Next Page