83
10.
MICROPHONE ANNOUNCEMENTS AND SOURCE EQUIPMENT
BROADCAST
This unit also permits broadcast from the microphone connected to the microphone input on the front panel, or
from external musical equipment connected to the auxiliary input located on both the front and rear panels.
Priorities are attached to broadcast as follows.
<Broadcasting priority order>
1. Emergency playback
2. Microphone announcement
3. Program playback
4. Broadcast of external musical equipment
Note: Broadcast cannot be made from the microphone or source equipment during recording. The
microphone or external musical equipment can be used only for recording during recording.
10.1. Making Microphone Announcements
Preset the microphone volume control to the minimum position (0).
(1) Connect the microphone to the microphone input on the front panel.
(2) Making announcements, adjust the microphone volume control for the most appropriate level.
Note: Program playback sounds are not audible during the microphone announcement.
However, the playback continues without stopping.
10.2. Making Source Equipment Broadcast
Preset the auxiliary input volume control to the minimum position (0).
(1) Connect the external musical equipment to the auxiliary input. The auxiliary input is located on both the
front panel (RCA pin jack) and the rear panel (phone jack). Signals to both inputs are internally mixed.
(2) Playing the external musical equipment, adjust the auxiliary input volume control for the most appropriate
level.
To Next Page
Loading...