Toa IP-A1SC15 - Page 7

7
 9.Statusindicator(orange)
Indicates the speaker’s operating status.
Speaker Operation Status Indicator
System startup Flashing twice
Broadcast standby Continuously lit
Broadcasting Continuously lit
System mute* Flashing quickly
Initialization or
rmware updating
Flashing slowly
* System mute is a state in which this
speaker is muted by the control from the
transmitting device.
10.Resetkey
The speaker begins to restart when this
key is clicked.
Hold down this key until the Status indicator
(9) ashes slowly to initialize the speaker’s
settings.
(See "INITIALIZATION OF SETTINGS" on
p. 15.)
11. Ring gasket
Prevents water from getting inside the
speaker’s rear cover.
12.Controlinputterminals
Allow input of control signals from
connected external equipment to enable
output of internal sound source les or
make calls to SIP devices.