Toa M-633D - 8 Using the Summing Output Keys

10
8. USING THE SUMMING OUTPUT KEYS
It is possible to output the stereo input signals applied to the STEREO 1 – 3 to the stereo "L" and "R" outputs
either in stereo mode or monaural mode.
Summing output key
Input Output
L
R
L
R
Output
Input
L
R
L
R
[When the summing output key is not pressed in (ST position)]
The "L" channel’s input signal is output to the stereo "L" channel output, and the "R" channel’s input signal to
the stereo "R" channel output.
[When the summing output key is pressed in (MONO position)]
Signals applied to each of the input "L" and "R" channels are mixed and output to the stereo "L" and "R"
outputs.