Toa VX-3004F - Page 42

2-29
Chapter 2 INDICATOR STATUS OF REMOTE MICROPHONES
2.13. Indicator State at the Time of Emergency Sequence Stop
When the system is set to "Emergency" and the type of the RM-300X to "Emergency" or "Emergency/General,"
the emergency sequence stop function can be assigned to the Function key.
Pressing the function-assigned key causes the emergency sequence to stop. The indicator to the left of the key
lights only when the key is pressed.
Notes
• Fortheemergencyfunctionsettings,seetheseparateSettingSoftwareInstructions,"BASICSETTINGS."
• ForthetypeoftheRM-300Xsettings,seetheseparateSettingSoftwareInstructions,"UnitConfiguration
Settings."
• Forinstructionsonassigningfunctionstothefunctionkeys,seetheseparateSettingSoftwareInstructions,
"EVENT SETTINGS."
(Always unlit, not used)
Key ON/OFF Indicator
Function key (Emergency sequence stop key)
The meanings of the 2 indicators next to the Function key are as follows:
Indicator Status Meaning
Key ON/OFF Indicator Unlit
When the function key is not pressed
Lights green
When the function key is pressed (as long as it is pressed)
[Whenassignedtothefunctionkey]
The meanings of the 2 indicators next to the Function key are as follows:
Indicator Status Meaning
Key ON/OFF Indicator Unlit
When the function key is not pressed
Lights green
When the function key is pressed (as long as it is pressed)
Emergency Broadcast
State Indicator
Unlit
Emergency Broadcast Pattern assigned to the function key
is not broadcast.
Lights green
Restoration Message broadcast assigned to the function key
is being activated.
Lights red
Emergency Broadcast Pattern assigned to the function key
is broadcast.
Emergency Broadcast State Indicator
Key ON/OFF Indicator
Function key
(Emergency broadcast pattern start/stop key)