• Display Signals
When the START pad is pressed:
Display Reason How to reset
[
The oven area is too hot
(above 40_/1051=). This
may occur during continuous
use.
When the oven area has
cooled, press STOP pad and
start again.
J
During operation
f
During operation the
remaining time dis-
plays as follows:
REMAINING TIME
mml
u:uuj
There has been an interrup-
tion in the power supply
(unplugging of the power
cord, or malfunctioning of a
household fuse or breaker).
SPECIFICATIONS
Remove the dough and start
again using all new ingredi-
ents.
J
tz'- Power supply A.C 120 V 60 Hz
Power Heater 550W
Consumption
Kneading Motor 100W
Dimension (WxDxH) 13_4"x10¼"xl 3" (35.0x26.0x33.0cm)
Weight APPROX 18 Ibs (Approx. 8.0kg)
Timer 13 hours digital timer
Cord APPROX 3' 11" (1.2M)
Main Heater Protector 3781= / 192°C
Thermal Fuse
Kneading Motor Protector 248F / 120C .,_
- 65 -
To Next Page
Loading...
