PRE-OPERATING PREPARATIONS 31
6
1. Air vent screw
2. Fuel tank cap
2. Open the fuel tank cap slowly.
3. Fill the fuel carefully not to over flow.
4. After filling the tank, close the fuel tank
cap.
ENOM01660-0
ENOW00022-A
The engine oil is drained for shipping from
the factory. Be sure to fill the engine to the
proper level before starting engine. (To
properly fill the engine with oil follow the
instructions, See page 67)
1. Genuine of recommended engine oil
2. Filler lid
3. Oil tank cap
ENOW0002A-A
Use of engine oils that do not meet these
requirements will result in reduced engine
life, and other engine problems.
ENOW00603-0
Do not mix different brands of oil. Mixing
different brands of oil, or different types of
oil even if the brand is the same, may cause
gelling, resulting in possible filter screen
blockage. This could result in serious
engine damage because of impaired lubri-
cation performance.
Use a genuine engine oil or recommended
one (TCW3). Refer to your Distributor.
Will not recommend use of other two
stroke engine oil.
3. Engine oil recommendation
CAUTION
2
1
ENOF00027-A
SAFE FILL
LEVEL
25 L
NIVEAU
MAXIMUM
ENOF00030-B
CAUTION
CAUTION
ENOF01963-0
1
3
2
To Next Page
