EasyManua.ls Logo

TOHATSU M 40D2 - Control System Adjustments; Remote Control Lever Friction; Trim Tab Adjustment Guide

TOHATSU M 40D2
90 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
ADJUSTMENT 61
9
1. Throttle friction adjustment screw
2. Lighter
3. Heavier
ENOM00076-0
ENOW00076-0
z Be sure that outboard motor is secured
to transom or service stand, or acciden-
tal drop or fall of outboard motor could
lead to severe personal injury.
z Be sure to lock outboard motor if it is
tilted up, or accidental fall of outboard
motor could lead to severe personal
injury.
z Do not go under outboard motor tilted
up and locked, or accidental fall of out-
board motor could lead to severe per-
sonal injury.
ENOW00075-0
Inappropriate adjustment of trim tab could
cause steering difficulty. After installing or
readjusting trim tab, check if steering fic-
tion is even.
If straight-line cruising can not be
achieved, adjust the trim tab located under
the anti-ventilation plate.
z If the boat veers toward the left direct
the trim tab towards A (left from rear of
boat).
z If the boat veers toward the right direct
the trim tab towards B (right from rear of
boat).
1. Trim tab
ENON00022-A
Notes
z After adjustment securely tighten the
trim tab fixing bolt.
z Check for looseness of the bolt and the
trim tab at regular intervals.
4. Trim tab adjustment
WARNING
WARNING
3
2
1
ENOF00078-0
1
1
ENOF00912-A