To Next Page

To Previous Page

ENGINE OPERATION

2. Feeding the fuel

Except for USA and Canada model

①

Full open the air vent screw on the

tank cap.

②

Open the fuel tank cap slowly

and release internal pressure

completely. After that, close the

fuel tank cap.

③

Connect the fuel connector to the

engine and squeeze primer bulb

until it becomes stiff to feed fuel

to carburetor. Direct arrow mark

upward when priming.

Engine side

Fuel tank side

For USA and Canada model

①

Full open the air vent screw on the

tank cap.

②

Loosen the tank cap untill contacts

the tab lock and release internal

pressure completely. After that,

close the tank cap until two clicks

sound is heard.

③