29
ENGINE OPERATION
6
When using EPA approval fuel tank,
only use a primer bulb/hose assembly
that has a Fuel Demand Valve installed
in the fuel hose or a sealing mechanism
in the fuel connector as shown below.
(FDV and fuel connector that has an
sealing mechanism prevent pressurized
fuel from entering the engine and
causing a fuel system overflow or
possible fuel spillage.)
Do NO T u se a pri m e r b u lb/h o s e
assembly that does not contain a Fuel
Demand Valve or a sealing mechanism
as shown below:otherwise overflow the
fuel system or fuel spillage may occor.
!
Sealing mechanism in
fuel connector
Identification
FDV in fuel hose
3. Starting
①
After making sure the stop switch
lock has been installed, connect
the hook to a part of the operator's
body.
Stop
Switch
Lock
Hook
Emergency Stop Line
MF, EF, EFT type
②
Place the shift lever in the Neutral
position.
Be sure that the shift is in Neutral
when starting the engine.
This model is provided with start in
gear protection.
R
F
N
OM_E_MFS15C-20C_body_111224.indd 29 11/12/13 12:40
To Next Page
Loading...
Need help?
General
