Tohnichi CEM3-G-BTA Series User Manual

26/35
xx. Default setting
All data would be cleared and settings back to default when select "DFT-Y" except for
the time and date settings.
Select the "DFT-Y" or "DFT-N" using upper or down arrow keys. When display shows
"DFT-Y" and press “MEM” key, the tool is factory reset. to save setting and go to next.
Press "MEM" key on "DFT-N" or press “MD” key to skip setting and go to next. Press “C”
key to go back to RUN mode (measurement mode).

Tohnichi CEM3-G-BTA Series Specifications

General

Brand	Tohnichi
Model	CEM3-G-BTA Series
Category	Measuring Instruments
Language	English