Tohnichi CEM3-G-BTA Series - Page 28

28/35
 Year setting
Set year using upper or down arrow keys. Press “MEM” key to save setting and go to
next. Press “MD” key to skip setting and go to next. Press “C” key to go back to RUN
mode (measurement mode).
 Month setting
Set month using upper or down arrow keys. Press “MEM” key to save setting and go
to next. Press “MD” key to skip setting and go to next. Press “C” key to go back to
RUN mode (measurement mode).
 Date setting
Set year using upper or down arrow keys. Press “MEM” key to save setting and
complete settings. Press “MD” key to skip setting and go to next. Press “C” key to go
back to RUN mode (measurement mode).
 End of settings and go back to measurement display
[Without angle setting]
[With angle setting]