Tokheim ProGauge MAGLINK LX - Page 20

MAGLINK LX Installation Manual | Connections
Rev. 09,
– April 2016 Page 20 of 24
The following picture shows the connection for the DRESSER management system (PIGNONE):
The following table lists the connection for the DRESSER management system (PIGNONE):
Console (DB9)
DRESSER system (PIGNONE) (DB9)
PIN 2
PIN 2
PIN 3
PIN 3
PIN 5
PIN 5
ATTENTION: It is recommended not to exceed 15 meters for serial connections between console
and management system via RS232.