Tokheim ProGauge MAGLINK LX - Connect the Console to the Management Systems

MAGLINK LX Installation Manual | Connections
Rev. 09,
– April 2016 Page 19 of 24
6.10 Connect the console to the management systems
The console can be connected via the RS232 port Com 1 on the following operating systems:
• DIALOG
• DOMS
• FUEL POS (VR350
Interface)
• GILBARCO
• ORPAK
• PIGNONE
• RETALIX
• Probe emulation
The following picture shows the connection for the DIALOG Fuel management system:
The following table lists the connection for the DIALOG Fuel management system:
Console (DB9)
DIALOG system (DB9)
PIN 2
PIN 2
PIN 3
PIN 3
PIN 5
PIN 5
---
Connect PIN 4 with PIN 6
The following picture shows the connection for the GILBARCO Fuel management system:
The following table lists the connection for the GILBARCO Fuel management system:
Console (DB9)
GILBARCO system (RJ45)
PIN 2
PIN 8
PIN 3
PIN 1
PIN 5
PIN 4