MAGLINK LX
Installation Manual
| General information
Rev. 09,
– April 2016
Page 6 of 24
The following image shows the lower part of the console:
The following table lists the elements in the figure:
Element Description
USB For firmware updates and back-up of the console (Refer to the "User Manual")
RJ45
For console configuration, and local network connections (Refer to the "Console
Configuration" manual)
RS232 com 1 Serial port for connection to management systems (FCC/POS)
RS232 com 2
Serial port to a local printer connection and possibility of duplicating the Gilbarco
protocol output required for DCD connections (Refer to the "User Manual")
Connections for
grounding the
system
For ground connections of the internal intrinsically safe barrier
To Next Page
Loading...
