Tomey MR-6000 - Manual Outline and Purpose

■ 1-14
1.3 Glossary
[AA]
：
Auto Alignment
[AS]
：
Auto Shot
[Auto Alignment]
：
Function to automatically align the sight in the up / down /
right /left / focus directions
[Auto Shot]
：
If the center of the cornea is in the Auto Shot zone, then
automatic measurement will be performed.
[Auto Power Off]
：
Function to automatically turn off the LCD, with only the
power lamp flashing, when the instrument is not operated
for the specified time (Auto Power Off mode). Touch any
button to return to Normal mode.
[Touch Alignment]
：
When directly touching the screen, the measuring head
moves so that the touched point is displayed in the center
of the screen. This allows you to focus the sight in the up,
down, left, and right directions without using the joystick.
[Touch panel]
：
Allows you to make various settings and execute the
touch alignment function by directly touching the monitor.
[Nozzle]
：
Opening to blow air for measuring intraocular pressure
[Nozzle limiter]
：
Function to set the stop position in order to prevent
contact between the eye to be inspected and the nozzle
[Manual measurement]
：
Mode to manually conduct alignment and measurement
by operating the joystick.