3-7
■
3.2 Measurement
Refer to the measurement procedure for each examination.
Capture the examination data on the measurement screen.
3.2.1 Basic flow of examination
(1) Entering the patient data
The patient list screen appears when the
instrument is started, measurement is newly taken,
the ID button is touched, or the new patient button
is touched, and allows you to select a patient.
(2) Checking measurement modes
Check the measurement mode displayed on the screen. If the mode is not appropriate,
change it with the mode switching button or REF/KRTTono/Pachy switchng button.
(3) Adjusting patient's eye height
When moving the head and/or chinrest, pay attention to the
position of the patient's face, hands, and fingers. Otherwise, they
may be injured by the movement of the head or chinrest.
The chinrest paper is provided to keep the chinrest clean. Use this
paper for the chinrest as well as the patient to use this instrument
comfortably.
To Next Page
Loading...
