■ Do not place any other objects on this instrument. Any foreign objects
entering the instrument may cause an electric shock or failure.
■ Do not block the vent. The temperature in the instrument will rise,
resulting in failure.
■ Do not lean on the instrument, press or pull the instrument from the
top. The instrument may topple over, resulting in mechanical failure or
injuries.
■ Do not apply strong impact to the instrument. The measurement
accuracy may be affected.
■ The head automatically moves after turning power on. Do not hinder
the movement of the head by pressing it with your hands or placing an
object in it’s path. An air blow test is automatically performed to check
air pressure for measurement of intraocular pressure. Do not allow the
patient to position their chin until the instrument stops completely and
the measurement screen appears.
■ If any smoke, offensive odor, or abnormal sound occurs, turn the
instrument off immediately, disconnect the power plug from the outlet,
and contact us or our local distributor.
■ Conduct regular inspections of the instrument and components.
■ Do not use the instrument for the period exceeding the specified
service life. Malfunction may occur.
■ Do not allow any person to place their hands or fingers in the following
parts clearance under the head, the space immediately under the chin
rest, the measurement window, or any moving section. Their hands or
fingers may be caught and injured. Also, never allow patients to place
their hands etc. in those places.
- The clearance and transforming part under the head
- Under the chinrest
- The measurement window
- The moving part on the upper part of the LED screen
To Next Page
Loading...
Need help?
General
