Operation Manual
10
3.2. Installation
To assure proper test conditions TCP-2000 Chart Panel should be mounted on the
wall perpendicularly to patient’s line of sights. The distance from panel to patient’s
eye can be adjusted from 2 to 7 meters, depending on test room conditions. There
is possibility to change distance units from meters to feet (6,5 to 23,5 feet). For
information on how to adjust the distance please refer to chapter 4.1.
Mounting instruction for TCP-2000 panel is presented below:
1) Disassemble wall mount kit from the display unit by removing 4 screws.
2) Mount wall mount kit to the wall with 3 screws (included in package).
3) Attach display unit to the wall mount kit.
To Next Page
Loading...
