Operation Manual
52
9. WARNINGS
• Exercise care to locate the Chart Panel away from any hazardous sources.
• It has been tested to the following specification: EN 60601-1-2:2001+A1:2006
Medical electrical equipment. General requirements for basic safety and essential
performance.
• Excessive interference may affect the Chart Panel operation. If it occurs the
failure cause shall be removed.
• Fix the Chart Panel securely. If the Chart Panel falls down, do not use it
because the absence of external damages does not mean there is no damage inside.
• Do not immerse in water.
• Do not sterilize or autoclave the Chart Panel.
• Do not expose the Chart Panel to direct sunlight.
• Do not place near heat source.
• Do not cover ventilation holes.
• Do not allow entry of fluids in the panel.
•
External electromagnetic interference may cause the device to stop working.
If above situation occurs during patient examination, this is not a threat to
patient safety.
Device should be restarted and examination must be conducted
from the beginning.