Tomey TCP-2000 - Chart Type - Display Mode; Modified, Snellen Contrast Chart Type); Optotypes Config

Operation Manual
15
4.3. Optotypes Config
This option allows to choose optotype kind: letters/children/numbers.
1. Choose ‘Optotypes Config’ using Arrow Up or Arrow Down button.
2. Press right Arrow to enter ‘Optotypes Config’
3. Press Arrow Up or Arrow Down to choose optotype kind.
4. Press Arrow Up or Arrow Down button to select your favourite optotype
kind.
5. Press Left Arrow to apply changes.
6. Select ‘Previous Menu’ using Arrow Up or Arrow Down to exit from
‘Optotypes Config’.
You can also Exit from ‘Optotypes Config’ by simply pressing
‘Setup’ button.
4.4. Chart type – display mode (Snellen, LogMar Modified, Snellen
Modified, Snellen Contrast chart type)
Option `Chart type` allows the user to work with Snellen Chart, LogMar Chart
Modified, Snellen Chart Modified or Snellen Contrast (please refer to chapters
5.2.1. , 5.2.2., 5.2.3. and 5.2.4.).
1. Enter ‘Chart type’, using Arrow Up or Arrow Down button.
2. Press Right Arrow to enter edit mode.
3. Use Up and Down Arrows to select parameter ‘Snellen Chart’, ‘LogMar
Chart Modified’, ‘Snellen Chart Modified’ or ‘Snellen Contrast’.
4. Press Left Arrow to apply changes.
Chart Type can be changed directly from IR remote. You can
select chart type using ‘CHART TYPE’ button.
Changes made only with the IR remote are not stored. After
restart of the chart panel chart type selected in the ‘Menu’ will
be active.
HINT !
WARNING !
HINT !