3-14
MODE
CYL
STEP
AUTO
R
SPH CYL AXIS ADD
HOLD
6) When the left lens is removed from the nose piece, the instrument is
ready to measure the left lens.
7) Place the left lens on the nose piece as described in step 2 and follow
steps 3-5.
• When the left lens is placed on the nose piece, "HOLD" will
disappear from the screen. However, the right lens data will
be retained, and if the READING button is pressed after
measuring the left lens, data for both lenses will be
displayed.
3.2 MEASURING METHODS
To Next Page
Loading...
Need help?
General
