3-17
3.2.5 MEASURING CONTACT LENSES (CL MODE)
• Be sure to use Contact Lens mode (CL mode) when
measuring contact lenses. Measuring in Spectacle mode
may result in errors because the measurement conditions
for contact lenses are different from those for spectacles.
1) Remove the standard nose piece and install the Contact Lens nose
piece.
2) Choose the CL mode by pressing the MODE button. Single Vision
mode (
), Multi-Focal mode ( ), and Contact Lens mode ( )
are set consecutively each time the MODE button is pressed.
MODE
CYL
STEP
R
SPH CYL AXIS ADD
3.2 MEASURING METHODS
C
L