⑫
⑬
⑭
⑮
⑯
⑰
⑱
⑲
⑳
㉑
㉒
㉓
㉔
㉕
Hinge
Hinge of the chamber lid.
Retaining ring
Part of the hinge of the chamber lid.
Top plate
Stainless outer covering enclosing the
vicinity of the chamber opening.
Lid hook
Used for locking the chamber lid.
Hinge shaft
Part of the hinge of the chamber lid.
Chamber
Chamber Bottom Plate
To prevent contentes to be sterilized from
touching heater at the bottom of chamber.
Lid hook boot
Lid hook catch
For the lid hook.
Chamber lid gasket
Maintaining air-tightness of the pressure
chamber.
Lid opening/closing sensor
Sensor detecting opening/closing of the
chamber lid.
Chamber lid
Safety valve hole
Leading to the safety valve. The safety
valve is a safety device which reduces any
abnormal pressure.
Drain port (Drain valve)
Drains sterilizing water from the chamber.
To Next Page
Loading...
