3-1. Method of movement and installation
3. INSTALLATION
Do not install the autoclave in places where
chemicals such as flammable or corrosive
gases are stored.
●
Contravention is dangerous with likelihood of fire
or electric leakage and shock due to corrosion of
electrical parts.
Do not install the autoclave in a dusty or wet
place.
●
Contravention is dangerous with likelihood of short
circuit or ignition of electrical parts.
Do not install the autoclave near a sink or water pipe or any place
where spillage of water is likely.
●
Contravention is dangerous with likelihood of electric leakage or shock.
Install the SX-E Autoclave on a firm and level surface such as
a concrete floor that is capable of supporting the weight of the
autoclave.
●
Contravention is dangerous with likelihood of injury or physical damage
should the autoclave fall.
Support the autoclave with both hands and
move it gently.
①
<
Method of movement and installation
>
To Next Page
Loading...
