5-8. Starting operation
Stop operation immediately when the pointer of the pressure gauge
reads above the red line during operation.
●
Contravention is dangerous with likelihood of damage to parts and burns or
serious accident due to explosive breakage. Stop operation immediately and
contact the dealer or business institution of our company.
Do not block the vicinity of the safety valve during operation.
●
Contravention is dangerous with likelihood of damage to parts and burns or
serious accident due to explosive breakage. Stop operation immediately and
contact the dealer or business institution of our company.
Be careful of steam emanating from the vicinity of the steam exhaust
opening during operation.
●
Contravention is dangerous with likelihood of scalds due to high temperature.
Be careful of steam emanating from the vicinity of the safety valve
during operation.
●
Contravention is dangerous with likelihood of scalds due to high temperature.
Press the [Start] key.
The operation indication lamp lights and operation starts. When the pressure in the chamber
is higher than the atmospheric pressure, this indication lamp lights in red. The indication
lamps corresponding to the selected course light on the work monitor. The indication lamp
corresponding to the time being carried out blinks in red and that of the completed time
lights in red.
※
When the lid status is not conrmed by the lid open/close detection system, the operation cannot
start. The lid open/close detection system activates when the lid is opened or closed.
※
The temperature in the chamber and remaining time are displayed during operation.
※
When the [Check] key is pressed during operation, the set values are displayed.
※
When an error is generated during operation, the indication lamp corresponding to the time being
carried out continues blinking in red.
①
To Next Page
Loading...
