Tomy SX-700E - 8-3. Replacing the Chamber Lid Gasket

ー47ー
1. Checking the leakage breaker
Turn ON the power supply switch on the main unit.
Press the gray test button within the power supply switch using a slim rod.
When the switch is turned OFF automatically, the leakage breaker is normal. When it is not
turned OFF, contact the dealer or business institution of our company.
<
Inspection
>
①
②
2. Checking the pressure chamber
Check for any damage such as cracks on the chamber lid gasket.
Check for any corrosion or damage such as cracks in the inside of the chamber.
Check for any corrosion or damage such as cracks on the chamber lid.
Check for any corrosion or cracks on the hinges, hinge shafts, retaining rings, lid hooks, or lid
hook catchs.
①
②
③
④
3. Maintenance of the Power Plug (for the unit with the power plug only)
Unplug the power plug.
Using dry cloth, wipe off any dust particles or other objects from the surface of the power
plug.
※
If the power plug generates abnormal heat or has any burn marks on it, stop using the equipment
and call for service.
※
If the power plug is too loose in the outlet, stop using the equipment and call for service.
①
②
Hinge
Hinge shaft
Retaining ring
Lid hook