@ ToolkitRC 2021
Turn [Scroll wheel] to adjust the value. When set to
[Auto], the charger will automatically recognize the
number of connected battery cells according to the
battery voltage connected to the output port. Short
press [OK] and [Exit] to take effect and return to the
previous interface.
=================================
Tips
1，Over-discharging or over-charging of the
connected battery may lead to incorrect recognition of
the battery cell number, and it is necessary to manually
set the correct cell number.
2，If the cell number is set incorrectly, it may not
be fully charged, or the battery may be damaged by
overcharging. Please set it carefully.
3，After Lixx battery is connected to the balance
To Next Page
Loading...
