Need help?Do you have a question about the ToolKitRC Q6AC and is the answer not in the manual?
Details on staying updated with news, information, and firmware updates for the charger.
Select or create a battery type for charging.
Configure the number of cells for the battery type.
Choose between charging and storage modes for compatible batteries.
Define the terminal voltage cut-off for charging and discharging.
Adjust the charging current based on battery capacity for safe charging.
Configure the PeakV setting for NiMH batteries to detect full charge.
Adjust charging parameters or stop the ongoing charging process.
Key tips for ensuring safe and proper operation during charging.
Configure settings related to the charger's input power source and parameters.
Set safety limits for temperature, time, and capacity to prevent hazards.
Procedure to manually calibrate the voltage measurement for improved accuracy.
Describes the charger's behavior when a lithium battery reaches full charge.
General| Max Input Current | 10A |
|---|---|
| Output Power | 200W |
| Charge Power | 200W |
| USB Output | 5V/2A |
| Operating Temperature | 0-40°C |
| Storage Temperature | -20-60°C |
| Charge Current | 0.1-10A |
| Battery Types Supported | LiPo, Li-ion, NiMH, NiCd, Pb |
| Balance Current | 300mA |
| Display | 2.4 inch |
| Cooling | Fan |
| Discharge Current | 0.1-2A (Max 2A) |
| Cell Count | 1-6S |
To Next Page
