@ToolkitRC 2023
connected, the power selection will be fixed to PI, p ow e r,
current, and voltage are also fixed values. P1 and P2 can
be selected when the input is DC. Users can set power,
current, voltage by themselves.
Max power: the maximum power absorbed from the
input port when charging.
Max current: the maximum current drawn from the input
port during charging.
Lowest voltage: is the lowest allowable input voltage.
Charging safety settings: Short press to expand the
settings. As shown below.
Safe Inter. Temp.: above this temperature value, the
device will stop the main port output.
Safe time: the maximum time of continuous charging, it
will stop charging if it exceeds this.
Safe capacity: the maximum capacity for continuous
charging, and it will stop working if exceeded.
Continuous work: after charging, whether to continue
To Next Page
Loading...
